How To Hang a TV?

 

Bought a new flat-screen TV? Want to know how to hang a TV? You can do it by hanging some precise measuring and driving a few screws. Want to get more in-depth knowledge about the same? Then read on the post below.

 

Today you can find dozens of TV models, which might confuse you or make you feel overwhelmed. However, you will be glad to know that it is not that difficult as it might seem. They are all just variations of the three basic styles of mounting. And the difference between the three types is mainly how much screen position adjustment is being allowed. Adjustments are made for eliminating glare and increasing the viewing comfort in other ways too. However, the adjustment is mostly necessary for picture quality.

Usually, the flat TVs are designed in a way so that it can be mounted to the walls. Hence you need to choose the right amount. Considering the wiring before choosing the mountain as the wiring style depends on the mount design. It also determines how and where you can install an outlet and cable connections.

Mount Styles

Let us look at the different styles of mount below:

•   Low-profile mounts: These are meant for necessary mounting that holds the TV close to the wall, which reduces the risk of TV damages or bruises.
•   Tilting mounts: Such mounts offer more adjustability and allow you to mount the TV above eye level or twist the angle to suit the situation. Such adjustability will enable you to watch your TV either from the floor or the sofa at your convenience.
  
•   Full-motion mounts: These mounts are the most versatile option. It allows you to tilt, pan, swivel, and extend your TV, which means you can pull the TV away from the wall and turn it to the left or right towards your face.

Adjusting the Height

To adjust the height of the TV in the right position, you might need three people. Once you have found the right spot, make sure to mark one corner with masking tape. Then add a video to keep the bottom edge and the other corner by sitting the TV aside.

People make a common mistake while picking a spot for a TV because they place it too high, which makes your TV watching uncomfortable and may give you a sore neck while displaying gloomy pictures, especially when the mount isn’t adjustable. According to some experts, centering the screen at eye level while some others say mounting it a bit lower is better so that the eye level is centered on the top two-thirds of the TV.

However, there is no correct height to hang a TV on the wall. It mostly depends on the size of the TV and the room. If you have a big TV that you want to mount in a prominent place, it should be mounted higher on the wall. The best way to find the right spot to mount the TV is by judging the viewing position and looking at the screen in different places on the wall. Once you find the right site, mark the TV’s location on the border with masking tape.

Modifying the Location

Mount the wall plate on the brackets and measure from the MTV’s right edge to the frame and then transfer the measurement to the wall. Now, locate the nearest stud and start drilling. As most of the wall plates allow you to slide the TV right or left a few inches, you need not have to worry about centering the plates perfectly to hang the TV. However, positioning can be a tricky affair!

How to Hang a TV?

•   Screw the brackets to the TV (follow the instructions).
•   Pry off the plastic plugs that are hiding the screw holes at the back of the TV.
•   Hang the wall plate on the brackets for attaching the complete mount to the TV.
•   Prop the TV against the wall and measure the distance from the bottom of the TV to the center of each row of mounting holes on the backplate.
•   Now, measure the same distances on the wall up from the tape and mark the stud locations.
•   Verify the marks with a level to ensure that they are at the perfect level (horizontally).
•   Drill holes at the marks for about 1/8 inches smaller than the lag screws.
•   After that, screw the plate to the wall using a ratchet wrench and socket.

Do not want to waste your time in multiple times adjustments and hassles? Then call up a handyman or a professional TV installer is highly recommended.

Conclusion:

Find the best TV installer to hang your TV with the utmost precision with the ChoreRelief app. For more details, visit https://chorerelief.com/

How To Fix My Toilet If It is Broken?

 

Toilets! What if these do not exist? What would we do without them? That is why making sure that the bathroom is appropriately functioning is necessary. However, with time and several other reasons, toilet parts start breaking down, leading to common concerns.  No matter how strong and durable your toilet is, if not given proper care and maintenance, sooner or later, it will become dysfunctional.

Broken toilets can be annoying. However, the problem might be minor and entirely fixable as well. Looking for answers to your question on how to fix my bathroom if it is broken? Then scroll down:

There can be different problems with different toilets. So let us check out solutions to the other issues of your toilet below.

1. Problem:

Water runs continuously along with a high-pitched, whining noise that stops by jiggling the handle a bit.

Solution:

You must clean the toilet flapper using a scrubbing sponge as many a time due to dirt accumulation. It may not be sealed tightly. Another issue might be the loosened chain; it could hold the flapper open if it is too tight. Replace the flapper. Cut back the fill tube to sit perfectly in the overflow pipe above the waterline, and your problem will be resolved.

plumber at work in a bathroom, plumbing repair service, assemble and install concept

2. Problem:

Overflowing toilet bowl.

Solution:

The problem might be due to clogging. So you need to lift the lid and lift the floating arm or turn the water supply off. If you notice a clog there, then clean it up.

3. Problem:

Water leak under the tank.

Solution:

The water leakage might be due to damage in the tank to bowl gasket. So to solve this problem, you will need to replace the tank.

4. Problem:

Toilet bowl leakage

Solution:

Usually, leakage in the toilet bowl is observed when it gets cracked. So for solving this problem, you might need to replace the entire toilet.

5. Problem:

The toilet flush is not working, and there is a need to hold the handle down always to flush.

Solution:

There might be a few reasons behind it. Firstly, the flapper might be wrong sized, and you need to replace it. The chain might have loosened, so you will need to tighten it for opening the flapper. Another reason that might be the problem is the tank’s water level, which you need to reset by twisting or bending the float cup. It will help you adjust the water level. Also, the arm may be broken, and if that is the case, you may want to replace it.

6. Problem:

Water leakage around the toilet on the floor damaging the flooring and spreading terrible odor.

Solution:

The wax ring might have been damaged, so you will need to replace it to reseal the toilet’s bottom. This will stop the water from leaking.

7. Problem:

Frequent wearing out of the flapper.

Solution:

To prevent the flapper from wearing out frequently, you will need to invest in a tank cleaner to keep it is clean.

8. Problem:

The tank is not filling up with water.

Solution:

There might be an issue with the water supply line, such as it might have been damaged, so if required, replace it. The water supply might be shut off; then, you will need to turn it on again. If that is not the problem, then the fill valve might be finished, so you will need to replace it. Another reason behind this problem might be an obstruction in the water supply, for which you may need to call a plumber.

If you still find the problem tricky or could not locate your toilet, it is recommended to call a plumbing expert for help. And today, you are seeing the right plumber nearby has become more comfortable with mobile apps like ChoreRelief that allow you to find the right plumbing experts at the convenience of your home.

Conclusion:

ChoreRelief is an innovative mobile app that allows you to find the right and dependable plumbing experts easily. For more information, visit website. Please connect with our social media page Facebook and Twitter.

5 Ways To Fix A Faucet

 

A leaking faucet is one of the few highly frustrating things. It does not just make a constant dripping sound, but also a substantial increase in your water bills can be noticed. Not only that, but the risk of mold growth also gets heightened in your home. 

However, the good news is that fixing a leaky faucet isn’t a costly affair like other home improvement projects, provided the severity of the plumbing issue plays a considerable role here.

 

There are five ways to fix a faucet that are productive and cost-effective. But for that, you will need to know the type of faucet you have and the necessary tools to correct the problem. As far as faucet types are concerned, four common types that include:

•   Compression faucet – Features one handle for cold water and one for hot water
•   Ball faucet – Features central handle powered by a ball bearing used for setting the desired temperature
•   Cartridge faucet – Features Sleeve-shaped central handle powered by the internal cartridge.
•   Ceramic-disk faucet – Features Central handle powered by a ceramic cylinder.

Necessary tools for fixing a leaky faucet include an adjustable wrench, flathead screwdriver, faucet washer, sink plug, O-rings, and brass screws.

5 Ways to Fix a Faucet

1. Finding the Source of a Leaky Faucet

Now that you know the faucet type and the tools necessary to fix it, the first step you need to take is to find the source of the leak or damage. If you see moisture directly below the faucet, then dry it first for better diagnosis. Is water dripping from the spout even after the tap is off? Or water leaks at the base and not from the tap? Does water leaks at the bottom as well as from the tap when the faucet is on? Or the water leaks through the handle’s top? If you cannot identify the leak source, then make sure to hire a professional for help.

2. Fixing a Compression Faucet

To fix a compression faucet, you will need to remove the handles by removing the decorative caps and then removing the screws beneath. You will need a wrench to remove the packing nut below the handle. Then remove the stem, O-rings, and seat washer. Usually, the seat washer is the main culprit behind the leaks in compression faucets, which can be diagnosed when the spout is dripping. And if the handles are leaky, then O-ring is responsible. You can replace the seat washer by concealing the replacement using a plumber’s grease and secure it with a brass screw. Now reassemble the faucet! And it’s done.

3. Fixing a Ball Faucet

To fix a ball faucet, you will need to purchase a replacement kit as the ball faucets consist of several parts and require specialty tools. You can use a screwdriver for removing the handle. Using pliers and a specialty tool, remove the cap, collar, and faucet cam, lift out the washer, and the ball bearing. For reaching into the faucet’s mechanism, you will need to use needle-nose pliers. Then remove the inlet seals and springs. Cut off the worn O-ring and replace it with a new one and coat the replacement using plumber’s grease before installation. Now install new springs, inlet seals, and washer and reassemble the faucet.

4. Fixing a Cartridge Faucet

Fixing a cartridge faucet will need you to remove the handle by removing the decorative cap after removing the screws beneath and tilting it backward. If there is any clip that holds the cartridge in place, then remove it using pliers. Now remove the cartridge by pulling it straight up and then remove the spout. Replace the worn-out O-ring and coat it with plumber’s grease and then reassemble the faucet.

5. Fixing a Ceramic-Disk Faucet

In this case, you will need to unscrew and remove the handle after removing the metal escutcheon cap located below. After that, unscrew and remove the disk cylinder and lift the neoprene seals from the cylinder out. Clean the openings of the cylinder using distilled white vinegar and a cleaning cloth. Then replace the worn-out neoprene seals and reassemble the faucet. Turn the water on slow pressure as a higher force may damage the ceramic cylinder.

Conclusion:

These are the five different ways to fix the faucet. However, if you find it confusing or want a professional fix, look for professional plumbers in your area via mobile apps like ChoreRelief, Home Advisor, etc.

6 Ways to Fix Broken Toilet

Fixing a broken toilet requires a professional plumber; however, a few times when DIY toilet fixing can be done. You just need a few DIY skills for that. Following are six ways to fix a broken toilet, have a look:

6 Ways to Fix Broken Toilet

1. Fixing a Clogged Toilet

The most common issue with toilets is a clogged toilet. This issue may originate either due to excessive water flow or flushing down too much material. Whatever might be the case, there are a few options for clearing out the clog. One of the best tools for this purpose is a plunger; however, choosing the right one is necessary. Push the plunger slowly as it will the first remover the air moving, and you will avoid splashing of dirty water on yourself. If you do not get the result after pumping the plunger a few times, mix baking soda and vinegar. This is a non-toxic solution that helps in keeping drains run smoothly. And if this trick also fails, then buy a plumbing snake and use it to avoid scratching or damaging your toilet.

 

2. Ballcock Replacement

Is your toilet running? Then the culprit might be the ballcock! A ballcock is a hollow ball that floats at the top of the water in your tank. It is responsible for operating the valve that keeps the water flowing and stopping. When the water is drained from the tank, the ball drops down. As the water gets filled in the tank, the ball raises, and the valve is connected to gets closed. If the water continues to run, then it indicates that the ballcock is not calibrated correctly. You can get pent the float arm for shutting off the tank or fine-tune the quantity of water you are using in your tank. The best way out is to replace the ballcock with a modern float-cup valve to avoid fixing this issue.

3. Issues with Flush Valve

Is the flush valve throwing tantrums? Take a closer look at it. The flush valve is a brass or plastic fitting located at the center of your tank attached to the opening. There is a flapper that is accountable for emptying water and keeping it in the tank. The overflow tube prevents the water from overflowing into the tank. If any of these components aren't working correctly, then it could cause the water to run.

4. Continuously Running Toilet

Is your toilet running always? Or do you need to waggle the handle often? Then the problem might be with the flapper. Here, it is necessary to completely seal the flush opening for keeping the tank run slowly. If the water in your tank runs too high, water flows into the overflow tube and is sent back into the tank. You can adjust the refill valves for changing the water level. If required, replace the flapper valve.

5. Loosened Flush Handle

A loosened flush handle can be a great hassle if not fixed on time. You will need to open up the tank and check the lift wire or chain for selecting it. In most cases, the lift chain gets tangled, bent, or broken, causing the handle to loosen up. The broken chain can be temporarily fixed with a paper clip. And if the mounting nut of the handle inside the tank is loose, you need to turn the nut and secure the handle to its location on the side of the tank.

6. Leaking Toilet Base

Some issues occur outside the bowl as well. However, before diagnosing the problem, consider the season due to humidity and condensation, some tanks appear leaky. However, if there is a puddle seen at the base of your toilet, be careful else you might have to deal with the dirty and contaminated water. A wax ring seals the bottom of the bathroom to the drain opening below. Remove the toilet to fix the problem, and for this, hire a professional plumber.

Conclusion:

If you find fixing the toilet too intense, then it is high to call a plumber. With mobile apps like ChoreRelief, you can easily find out the best and background checked plumbers in and nearby your area. To know more about the app, visit https://chorerelief.com/